BMW's Hofmeister kink began as a steel fix, not a styling flourish

BMW's Hofmeister kink began as a steel fix, not a styling flourish

BMW's own archive says the bend at the base of the rear pillar solved a structural problem on the 1961 BMW 1500. The name of design chief Wilhelm Hofmeister was attached to it years later.

Written by Beau Ackx

16/10/2026

The bend in a BMW's rear window is older than the name it carries

Wilhelm Hofmeister ran BMW design from 1955 to 1970, and his name now sits on a corner of glass most drivers never look at. The kink at the foot of the rear pillar debuted on the BMW 1500 at the Frankfurt motor show in September 1961. BMW's own heritage account says it started as engineering, and that the name came years later.

BMW's Hofmeister kink began as a steel fix, not a styling flourish

BMW 1500, 1961: a wider pillar base for an all-steel roof

BMW's 2011 heritage release for the Neue Klasse's 50th anniversary says the kink began on the 1500 for plain structural reasons. The base of the rear pillar was widened because the car was built entirely in steel, and the engineers wanted to rule out a weak point where the roof met the body. That broadening produced an angle instead of a curve. The car itself caused a half-hour queue at the 40th Frankfurt show, which counted around 950,000 visitors that year, and it pulled BMW out of a decade of Isettas and loss-making V8 saloons.

Wilhelm Hofmeister, the engineer who ran BMW design from 1955 to 1970

Hofmeister, born in 1912, trained as an engineer at Hamburg's coachbuilding school rather than as a stylist, and he is remembered more as a manager than as an artist. For the 1500 he took advice from the Italian designer Giovanni Michelotti, whose draft his team then finished in Munich. BMW's archive is precise about his part in the kink: the shape was named in honour of the body chief who cultivated it as a BMW styling element, years after it first appeared. He handed over to Paul Bracq in 1970 and died in 1978.

Giugiaro was 22 when he shaped the BMW 3200 CS for Bertone

The second BMW with a kink stood beside the 1500 at the same 1961 show: the 3200 CS, a V8 coupé styled at Carrozzeria Bertone by Giorgetto Giugiaro, then 22 and newly in charge of Bertone's design studio. Bertone built the bodies near Turin and sent them to Munich for final assembly, and only about 600 were made before production ended in September 1965. Hofmeister's team made only light changes to Giugiaro's drawing. The coupé's rear side windows carried the same bend, so the BMW signature arrived from Munich and from Italy at once.

Kaiser drew the same bend in 1951, a decade before Munich

American cars got there first: the 1951 Kaiser, styled by Howard 'Dutch' Darrin, already had a pronounced kink at the base of its rear pillar. Chris Bangle, BMW's design chief from 1992 to 2009, said in a 2015 interview that Hofmeister "got his name attached to something he promoted." Bangle also made the practical case. A fixed glass triangle at the back of the rear door gives the drop window a straight guide, so it can sit far back and still wind fully down, and it moves the door opening rearwards over the wheel arch for easier entry. The Fiat 127 from 1977, the Opel Ascona and Saab's 'hockey stick' all used the idea.

BMW iX3 and i3: the Neue Klasse moves the kink into the glass

The 2025 BMW iX3, the first production Neue Klasse model and World Car of the Year 2026, keeps a pronounced kink, but it is etched into the side-window graphic rather than pressed into the steel. The electric i3 saloon, built in Munich since August 2026, keeps it too. BMW has stretched the shape before: the 2019 G20 3 Series turned it into an arrow that drew criticism, and the 2025 Vision Driving Experience prototype hid its rear door handle inside the kink. Design chief Oliver Heilmer, in charge since 2024, has kept it through the brand's biggest visual reset in years.

AutoNext Take

Wilhelm Hofmeister got his name on a bend he did not invent, and the bend has repaid the honour for 65 years. It survived because it started as the answer to a problem, a stiffer roof joint and a window that could drop all the way, and only then became a signature. A purely decorative detail would have gone in the first redesign that found it awkward; this one has outlived the steel structure that made it necessary, and now lives in the glass of cars with no engine at all.

Every Neue Klasse saloon and SUV that BMW launches before 2030 will keep a kink in some form, in glass or in steel, because it is the one cue that still separates a BMW side view from its rivals now that the kidneys are shrinking. If a 2027 or 2028 Neue Klasse model appears without it, that will say more about where BMW is heading than any concept car.

Follow us on Google News

Set AutoNext as your preferred source on Google Discover

Mercedes Pagoda and BMW sharknose: one Frenchman drew both
Automotive Industry
05/10/2026

Mercedes Pagoda and BMW sharknose: one Frenchman drew both

Bordeaux-born designer Paul Bracq gave Mercedes-Benz its 230 SL Pagoda in 1963, then moved to BMW in 1970, where he drew the gullwing Turbo concept and the 6 Series sharknose. Between the two he worked on France's TGV 001 prototype train. He ended his career on Peugeot interiors in 1996.

Read the article
The new BMW 3 Series goes electric without ditching the petrol six
New Models
30/09/2026

The new BMW 3 Series goes electric without ditching the petrol six

The eighth-generation BMW 3 Series is the first that can be bought as a full electric car, the new BMW i3, with up to 912 km of WLTP range and 400 kW charging. BMW has kept the petrol engines too, led by a 443 hp mild-hybrid M350 xDrive straight-six with a new Drift Moment mode, and a plug-in hybrid follows within the year. It is a deliberate technology-open take on the compact executive saloon.

Read the article
BMW iX3 Wins “World Car of the Year” 2026 and the World Electric Vehicle Title
Electric Cars & Technology
02/04/2026

BMW iX3 Wins “World Car of the Year” 2026 and the World Electric Vehicle Title

Sometimes a new car arrives that doesn’t just introduce a model, it signals a shift for an entire brand. That is precisely what happened with the BMW iX3, which has now been crowned both “World Car of the Year 2026” and “World Electric Vehicle 2026.” The awards were announced during the New York International Auto Show, where the first production model of BMW Neue Klasse secured a double victory against dozens of competitors.

Read the article